This is Barbara Polston, American Quilter Contributing Editor, writing from Phoenix, Arizona. I’ve been working on a quilt where the blocks are tracings of children’s hands positioned to look like hearts. To give the fused appliqué a nice finish, I machine blanket stitched around all the shapes. After doing about three dozen, I thought I would share a technique for turning the inside corner neatly. Using your machine’s needle-down feature is a great help here!
1. As you approach the corner, make sure your last left-right stitch ends with the needle down right at the corner. We’ll call this the pivot point.
2. Raise the presser foot and turn the block so that the foot is at a 90-degree angle to the corner.
3. Lower the presser foot and take one-half stitch (the needle comes up). Then raise the presser foot and reposition the block so that the needle will re-enter the fabric at the pivot point. Lower the presser foot and complete the stitch; your needle will be down and at the pivot point.
4. Complete the left-right stitch, which will end with the needle down at the pivot point.
5. Raise the presser foot and turn the block so that your foot is at a 90-degree angle to the next segment you’re going to stitch.
6. Lower the presser foot and take one-half stitch (the needle comes up). Then raise the presser foot and reposition the block so that the needle will re-enter the fabric at the pivot point. Lower the presser foot and complete the stitch; your needle will be down and at the pivot point.
7. Complete the left-right stitch and keep sewing.
This method gives inside corners a three-stitch finish, just as if it the stitching were done by hand. With some practice, you’ll be turning those pesky inside corners with ease!
1. As you approach the corner, make sure your last left-right stitch ends with the needle down right at the corner. We’ll call this the pivot point.
2. Raise the presser foot and turn the block so that the foot is at a 90-degree angle to the corner.
3. Lower the presser foot and take one-half stitch (the needle comes up). Then raise the presser foot and reposition the block so that the needle will re-enter the fabric at the pivot point. Lower the presser foot and complete the stitch; your needle will be down and at the pivot point.
4. Complete the left-right stitch, which will end with the needle down at the pivot point.
5. Raise the presser foot and turn the block so that your foot is at a 90-degree angle to the next segment you’re going to stitch.
6. Lower the presser foot and take one-half stitch (the needle comes up). Then raise the presser foot and reposition the block so that the needle will re-enter the fabric at the pivot point. Lower the presser foot and complete the stitch; your needle will be down and at the pivot point.
7. Complete the left-right stitch and keep sewing.
This method gives inside corners a three-stitch finish, just as if it the stitching were done by hand. With some practice, you’ll be turning those pesky inside corners with ease!
For more great tips on blanket stitching by machine, read Ricky Tims' article in the September 2008 issue of American Quilter magazine.
No comments:
Post a Comment